KZM6 RTF

One-side edge banding machine right execution. Edge's support - up to ø 600 mm. . Adhesive part for granular melt glue. Exchangeable Teflon glue tank under melting roller. Apply the glue by means of glue roller in a direction identical as the piece direction without need of adjusting towards material's thickness. Two zones for electronic regulation of the glue temperature. Automatic lowering the temperature of the glue at recess. A guillotine for preliminary cutting of thick PVC /ABS edges max. 3 x 60. Squeezing area: three rollers – the big positive pressure and two cone rollers. Pressing with pneumatic. Ending trim unit with two HF motors – 200Hz, 12000rpm. Circular blades ø110 х ø32, Z=20 teeth – 2 pieces. Unit for upper and lower milling with vertical and horizontal adjustment with two HF motors 200 Hz, 12000 rpm and milling heads ø 75mm, Z = 6; 15°, R2 or R3 mm (option). Rounding unit with one HF motor -200Hz, 12000rpm. Diamond milling head - PCD CUTTER D68/61x d16 x 7 Z=4 R2 or R3 (option). Pre-milling unit – two HF motors – 1.5 kW, 12 000 min^-1. Diamonds milling heads – PCD CUTTER D.60 x d20 x 65 Z 3+3. Edge scraper unit, R2 or R3 mm (option). Glue scraper unit. Polishing unit – two motors, two polishing discs 2хø125mm, 2x0.18kW, 2800 min^-1.

IR lamp (option). Spray system before Pre-milling group (option). Spray system after Edge scraper unit (option). Nesting group (option).

Central manual adjustable upper squeezing. Transport system with chain. Pressing rollers with bearings. Supporting beam with rollers - mobile. PLC Control panel at the front side of the machine. Environment temperature: + 18° max + 35°C.

STANDARD PERFORMANCE	KZM6 RTF

Thickness of machined pieces, mm	10 - 45
Minimum length of machined pieces, mm	120
Minimum width of the piece, mm	100
Thickness of the coiled edgeband, mm	0.4 – 3.0
Feeding speed, m/min	10
Edge trim unit
- power of the motor, kW	2 х 0.22
- RPM of the motor, min^-1	12 000
Milling unit
- power of the motor, kW	2 х 0.55
- RPM of the motor, min^-1	12 000
Rounding unit
- minimum length of machined pieces, mm	120
- power of the motor, kW	2 х 0.55
- RPM of the motor, min^-1	12 000
Pre-milling unit
- power of the motor to first head, kW	1.1
- power of the motor to second head, kW	0.75
- RPM of the motor, min^-1	12 000
Edge scraper unit	+
Glue scraper unit	+
Polishing unit
- power of the motor, kW	2 x 0.18
- RPM of the motor, min^-1	2800
Extension table with rollers - Immovable
Diameters of the aspiration plugs, mm	2хø100, 2хø120
Compressed air pressure, bar	6.5
Total installing power, kW	6.7
Overall dimensions L х B х H, mm	4100х1220х1686
Weigh, kg	1170

OPTION
Thickness of machined pieces, mm	10 - 60
Thickness of the lath edgeband, mm Minimal length 215mm	0.4 - 5
Pre-milling unit
- power of the motor, kW	2 x 1.5
IR lamp
Spray system before Pre-milling group
Spray system after Edge scraper unit
Nesting
Touch screen	7”
Extension table with rollers - movable

KZM6 RTF

Pre-milling unit

Rounding unit

Edge scraper unit and Glue scraper unit

Edge banders REQUEST MORE INFORMATION